Automatic Diaphragm Dehydration Press Filter Press
PRODUCT INTRODUCTION
The plate and the frame are arranged alternately and covered with filter cloth on both sides of the filter plate. The plate and the frame are compacted by a compaction device, that is to say, a filter chamber is formed between the plate and the frame. There are small holes in the same part between the upper end of the plate and the frame, which become a channel after compaction. The sludge is pressurized to 0.2~0.4 MPa.The channel enters the filter chamber.The surface of the filter plate is engraved with grooves, and the lower end is drilled with channels for the discharge of filtrate.Under the pressure, the filtrate is discharge through the filter cloth, along the grooves and channels to dehydrate the sludge.
- Information
SYSTEM CHARACTERISTICS
It has wide application scope, low moisture content of cake, clear filtrate, low energy consumption, stable and automatic operation, and meets the design of high-demand operation conditions, long service life.